JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment Gypsum Arch
✨✨✨ Welcome to Xinxinbang ✨✨✨ Dental Lab Device JT-19 Wet Model Trimmer Abrasive Disc Wheel Gypsum Arch 500W Features: 1. Connect One End of the Water Tube to the Nozzle of the Wet Model Trimmer and the Other End to the Tap, Open the Valve 2. Connect the Waste-disposal Tube to the Unit 3. Connect the Power Cord, and Switch on the Power Switch (O=off, L=on) 4. When Braking, It Is Normal to Hear Clicking Before the Sand Tablet Stops. If the Sand Tablet Makes Unusually Loud Noises, Remove It, and Use the Included Hex-wrench to Adjust the Screw on the Back Cover (18) 5. To Check If You Need to Replace the Abrasive Disk, Rotate the Disk by Hand and Estimate: If the Platform Jumps More than 2mm, Change the Disk. After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Cl.
500W Dental Lab Wet Model Trimmer w/ Abrasive Disk Model Trimming Machine JT-19
Power: 500w Rotational Speed: 2800 RPM. After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Closest to the Outside of the Sand Tablet). Connect the Power Cord, and Switch on the Power Switch (O=off, L=on).